User Tools

Site Tools


This module contains USB ports. Using SSH or LuCI, more experienced users can configure devices for different functions.

If using module F use this module to power the whole set. It‘s possible to power the whole set from module F without using a power supply connector on module A. It is also possible to use both power sources and both connectors.

Recommended average load for USB ports on module F while using all ports and using power supply on module F is 800mA maximum per port. This limit should be more than enough for ordinary usage. If you need a little bit more we recommend using additional cooling. While using power supply on module A only the limit is significantly lower, up to unusable. The real limit depends on other connected modules.

Technical specifications:

  • 4x USB 3.0 ports
  • 2 years warranty
  • 1× 64 pin female connector and 1× 64 pin male connector for connection additional modules
  • DC input 12 V ± 5 % / 5 A

More technical specifications:

  • Size: 110 mm × 58 mm × 19 mm (without case)
  • Ambient operating temperature: 0 °C to 40 °C (40 °F to 104 °F)
  • Humidity: 10% to 90% RH, Non-condensing

Links to all MOX modules: