This is an old revision of the document!
This text is only an example of usage of available pin headers on Turris Omnia. We are currently not considering any commercial sale or any other distribution of Turrisduino. All documentation and fabrication outputs can be found at the bottom of this page.
Turrisduino is an expansion board for pin headers (GPIOs) in our router Turris Omnia. It is similar to Arduino-style boards - the board connectors have the same layout as on Arduino boards - so it is possible to connect almost any of the available Arduino shields. For example shields for wireless modules, LCD modules, measuring temperature and so on.
Image 1 - Turrisduino
Turrisduino is connected to the router Turris Omnia via a ribbon cable and so-called “connector board” (See Image 2).
Image 2 - Connector board
Although Turrisduino has the same connector layout as Arduino, there are a few differences between them, mainly in a number of available pins.
|Max number of GPIO||20||14|
|Number of analogue inputs||6||4|
You can download the fabrication outputs, schematics and even project files from Altium Designer here turrisduino_documentation.