This module contains USB ports. Using SSH or LuCI, more experienced users can configure devices for different functions.

If using module F use this module to power the whole set. It‘s possible to power the whole set from module F without using a power supply connector on module A. It is also possible to use both power sources and both connectors.

Recommended average load for USB ports on module F while using all ports and using power supply on module F is 800mA maximum per port. This limit should be more than enough for ordinary usage. If you need a little bit more we recommend using additional cooling. While using power supply on module A only the limit is significantly lower, up to unusable. The real limit depends on other connected modules.

Technical specifications:

• 4x USB 3.0 ports
• 2 years warranty
• 1× 64 pin female connector and 1× 64 pin male connector for connection additional modules
• DC input 12 V ± 5 % / 5 A

More technical specifications:

• Size: 110 mm × 58 mm × 19 mm (without case)
• Ambient operating temperature: 0 °C to 40 °C (40 °F to 104 °F)
• Humidity: 10% to 90% RH, Non-condensing

Links to all MOX modules:

• MOX A (CPU) - basic processor board
• MOX B (PCI) - extension module with a miniPCIe slot
• MOX C (ETH) - TOPAZ module with 4x 1Gbps ethernet LAN ports
• MOX D (SFP) - SFP module with an optical port for up to 2,5 Gbps
• MOX E (Super ETH) - Module with 8x ethernet LAN ports
• MOX F (USB) - extension module with USB ports
• MOX G (Super EXT) - extension module with a miniPCIe slot with more extension modules possibility
• Upgrades - parts for upgrade