This documentation is no longer maintained by the Turris team (although it
can be used by the community to share content). The current official
documentation is at docs.turris.cz.
- cs
- en
Network stack
This is the default Turris Omnia network stack.
| Jack labels on the backside of the router | WAN | LAN0 | LAN1 | LAN2 | LAN3 | LAN4 | Wi-Fi 5GHz ac | Wi-Fi 2.4GHz b/g/n | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Switch | ports | 0 | 1 | 2 | 3 | 5 (CPU) | 4 | 6 | ||||
| VLANs | VLAN ID:1 (connection of ports 0 1 2 3 5) | VLAN ID:2 (connection of ports 4 6) | ||||||||||
| Processor network interfaces | eth1 | eth0 (through port 5) | eth2 (through port 6) | |||||||||
| Logical interfaces | wan | wan6 | (br-)lan (bridge connecting eth0, eth2 and Wi-Fi) | |||||||||
| Firewall zones | wan | lan | ||||||||||
For reference, here is the schema of the hardware setup and the interconnection of individual components:
Turris is developed by CZ.NIC, z. s. p. o.
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
